en
0b

Number Base Converter

Convert numbers between decimal, binary, octal and hexadecimal – or into any base from 2 to 36. For negative numbers the converter also shows the two’s complement.

Whole numbers only. Spaces and underscores as separators are fine, and so are the prefixes 0b, 0o and 0x.
With “other base” selected this is the base of your input; otherwise the number is also converted into this base.

Result

Decimal–
Binary–
Octal–
Hexadecimal–
In the other base–
Two’s complement (binary)–
Two’s complement (hex)–
Binary digits–

How it is calculated

In a positional number system with base b, every digit is worth b times as much as the one to its right. Binary (b = 2) only uses the digits 0 and 1; hexadecimal (b = 16) uses 0–9 and A–F for the values 10 to 15.

1011₂ = 1·2³ + 0·2² + 1·2¹ + 1·2⁰ = 11₁₀

To go the other way, divide the decimal number by the base again and again; the remainders read from bottom to top are the digits. One hex digit is exactly four bits, one octal digit three bits.

Two’s complement is how computers store negative numbers: invert all bits and add 1. The converter picks the smallest width that fits: 8, 16, 32 or 64 bits.

Example

The decimal number 100 is 0110 0100 in binary, 144 in octal and 64 in hex.

Frequently asked questions

How do I convert decimal to binary?

Divide the number by 2 repeatedly and write down each remainder. 13 ÷ 2 = 6 r 1, 6 ÷ 2 = 3 r 0, 3 ÷ 2 = 1 r 1, 1 ÷ 2 = 0 r 1. Reading from bottom to top gives 1101.

How do I convert hex to binary?

Replace every hex digit with its four bits: A = 1010, F = 1111. So 0xAF becomes 1010 1111.

Why do programmers use hexadecimal?

One byte (8 bits) fits exactly into two hex digits. That is why memory addresses, colour codes like #FF8800, character codes and bit masks are usually written in hex.

Can I convert numbers with decimals?

No, the converter works with whole numbers – but they can be as large as you like, far beyond 64 bits.

Embed this calculator on your website

You may embed this calculator on your website, blog or forum for free. Just copy this code: